Get These Handy Tips on How to Tile a Shower Wall

How to Tile a Shower Wall

Your bathroom wall looks old and needs renovation? It’s time to tear the obsolete tiles off and put up the brand-new ones. If you go for a budget plan, hiring a professional to fix the lavatory of yours would be such a bad idea. To cope with this, why don’t you have a try on the DIY approach? You can save more money.

The cost to tile a shower is relatively cheap letting you spend 25 USD per square foot. Here is a handy guideline on how to tile a shower wall you can easily follow:

1. Prepare the Tools and Shower Wall Materials

Providing the required tools and materials is a must when it comes to tiling a shower wall. The necessary items are nothing else but the tiles. If you choose ceramic materials, be sure to install the finest the same is true with the durable tiles.

Our true recommendation for shower wall tile goes to porcelain tile. Not only is the kind resistant to water but porcelain is tougher, thicker, and less porous. Unless it’s your favorite, try this alternative – brick, and subway tile shower. It matches with modern and traditional designs.

For the adhesives, never leave out the thin-set solution – mortar is considered the best as it contains lime as well as finely graded sand. In spite of it, still, you require grout to fill in the gaps obtainable on the floor tiles. To shape and spread the mortar over the base, you must include a trowel.

Out of plentiful varieties, the mason’s trowel is the most common. Other tools cover a bunch of screws, a couple of fixtures, a sanding block, and not to mention a sponge.

When the necessities for the DIY tile shower become the focal point, you are required to include an instrument for leveling, measuring tape, electric screwdriver, as well as a pencil). Is the protection device still needed while taking the tile installation?

To anticipate everything like health issue affecting your breathing system, it’s essential that you wear a mask and safety glasses as well. Besides, don’t skip out to provide an electric saw for cutting the tiles, grout float (from rubber), and a rubber mallet.

2. Prepare the Area of Your Working

If your old tiles are still sticking to the bathroom wall, immediately remove them and let the wall as blank as possible. The shower pan needs to be demounted too for the better working performance. Afterward, cover everything located underneath. You can use some pieces of plastic to wrap the surface. The covering also applies to the tub.

This fundamental step needs to carry out is basically to prevent the moist absorbance. If you don’t this, you will have other issues induced by the dampness (rotting for instance).

Once everything is cleared out, the early step you need to do is none other than reinstalling the shower pan. To makes sure that your home plumbing system is fine, never hesitate to call a skilled plumber.

You don’t want a leakage, or water penetration happens on it, do you?  If you are already gifted, there is no harm to fix it by yourself. Moreover, be cautious while doing this.

3. Set the Selected Tiles on the Floor and Opt for Your Design

Regardless of your future wall design of the bathroom from intricate to simpler ways, it’s vital that you test them out first on the floor. Perhaps, you’ve already made an exact measurement before but who knows the tiles don’t fit the wall as you expect before.

Otherwise, you change your design all of a sudden; you still have time to arrange the pattern. Start laying out the porcelain pieces and assess the fixed design.

4. Focus on the Base and Go with the Cement Board

The next step is to prepare a nice and elegant base. Remember it should be well-built to be able to support the tiles. This time, you are required to install the sturdy cement board. Some might think that this step is pretty hard – yet the reality tells something different.

As long as the cement board belongs to the best one, the procedure will be nothing but trouble-free. Our great recommendation is Durock Next Gen. This brand is quite famous in the market though. Moreover, it’s easy to cut.

5. Make Your Shower Waterproof

Some homeowners always skip this step. They don’t think that waterproofing is such an important part as water must flow down from the tub – hence, your bathroom wall doesn’t get much affected. This perception is wrong. All we can say is that waterproofing is a must.

The whole structures of your space for taking a shower should be water-resistant. Keep in mind that dampness will always find its very own way to damage your bathroom.

6. Install the Tiles

Get the spare fixture and stick it to the wall – the distance is just one tile up above your floor. To make a straight line, be sure to apply the builder’s level.

Once the thin-set solution is ready to use, apply it immediately to the back of the tile with a trowel then embed the square object gently on the designated area and press it. Do the similar job until the wall is fully covered with the tiles.

7. Fill in and Grout the Gap

After nicely laying out the tiles, it’s time to fill in the gap that separates the wall and the floor. Besides, let the tile surface stay straight by applying tools named wedges and spacers. Moreover, finally, the last step is none other than the grouting process.

As it’s considered as something messy, ensure that the tub is already wrapped. The time-consuming procedure requires you to block the gap between wall tiles.

In closing, you might find that the procedures on how to tile a shower wall simple to follow. Things to remember including preparing the best tile for shower wall and going for waterproofing to anticipate the moisture problem.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.